top of page

Anderson / Separator Vessels / Centrifugal Separators / Type BI Steam Drum Internal Separator

Anderson Steam Drum Internal Separator

BI · BI-6 · BI-10

The Anderson Type BI Steam Drum Internal Separator is a vessel-mounted centrifugal separator engineered to remove entrained water droplets and solids from steam inside boiler and HRSG steam drums. Using Anderson Hi-eF™ separation technology, it delivers clean, dry steam with low pressure drop while helping protect superheater surfaces and support high-purity steam service.

Drag to orbit, scroll to zoom. Cutaway and the color key isolate the internals; Play walkthrough steps the principle of operation.

LIVE 3D SECTION

Designed for

 

Designed specifically for installation inside steam drums, the Type BI uses a controlled, three-stage flow path to separate entrained liquid and solids before steam leaves the vessel. Separated liquid is returned below the drum water level through ejector drains. The compact design has no moving parts, filters, or screens, supporting reliable operation with minimal maintenance.

 

Product configurations

 

  • BI. Steam drum internal centrifugal separator for superheater protection and high-purity steam service. Available in BI-6 and BI-10 sizes with 316 stainless steel separation elements.

 

Key points of differentiation

 

  • Steam quality. Removes entrained moisture and solids before steam exits the drum, supporting dry, high-purity steam.

  • Superheater protection. Helps reduce the carryover of solids that can accumulate on superheater tube walls.

  • Low pressure drop. The engineered internal flow path supports separation without unnecessarily compromising steam system performance.

  • Low maintenance. No moving parts, filters, or screens means fewer wear components and no routine element replacement.

  • Compact internal design. Fits within the steam drum and returns separated liquid below the water level through ejector drains.

 

Applications

 

The Type BI is applied inside boiler and HRSG steam drums where entrained moisture and solids must be removed before steam enters downstream equipment. By separating carryover within the drum and returning collected liquid below the water level, the internal supports steam quality while protecting critical heat-transfer surfaces and process equipment.

 

  • Boiler steam drums: Removes entrained water droplets and solids from steam before discharge, helping maintain dry steam quality and reduce carryover into downstream equipment.

  • Heat recovery steam generator (HRSG) steam drums: Separates moisture and particulate carryover under HRSG operating conditions, helping protect downstream steam-path components and support consistent system performance.

  • Superheater protection: Limits the moisture and solids reaching superheater tubes, helping reduce deposits, fouling, erosion, and the potential for tube damage.

  • High-purity and dry steam service: Provides final internal separation before steam leaves the drum, supporting low-solids, low-moisture steam for applications where purity and equipment reliability are critical.

 

Principle of operation

 

Type BI three-stage separation:

 

  1. Centrifugal force. Controlled downward rotary motion drives liquid droplets and solids out of the steam by centrifugal force.

  2. Gravity. The rotating flow slows and transitions into a more linear path, allowing additional entrainment to drop out.

  3. Centrifugal force. Renewed centrifugal action removes the remaining entrainment before clean, dry steam exits the vessel.

  4. Separated-liquid return. Collected liquid is routed below the drum water level through ejector drains.

SPECIFICATIONS

Steam purity

Total solids as low as 1.0 PPM under specified boiler service conditions

 

Efficiency

Removes 99% of entrainment ≥ 10 microns

 

Operating envelope

Engineered to customer specifications

 

Service media

Steam

SIZES AND MATERIALS

BI-6

6-inch nominal size

 

BI-10

10-inch nominal size

 

Construction

Compact, for installation inside the steam drum

 

Body

Carbon steel

 

Separation elements

316 stainless steel

INSTALLATION AND SERVICE

Mounting

Bolted into the steam drum

 

Liquid return

Below the drum water level through ejector drains

 

Moving parts

None — no filters or screens

Request sizing · RFQ

Additional Internals and Separator Bodies

Pocket type vane bank across the drum steam space, working with the drum separators.

View product

Centrifugal elements built to mount inside the purchaser's own vessel.

View product

All Anderson centrifugal separator families, side by side.

View product

The same element in a line body, for steam and gas distribution piping.

View product
Steam turbine rotor close-up

Drum internals are engineered to customer specifications.

Size selection, element arrangement and the liquid return are set by the drum and the steam conditions. Send us the drum drawing and the service conditions and we will design a solution.

bottom of page